FAG 6308 bearing

Single row deep groove ball bearings are the most widely used bearing type (fig. 1). They are available capped (with seals or shields) or open. Open bearings that are also available capped may have recesses in the ring side faces (fig. 2).

Inch bearings in the EE(B), RLS and RMS series are intended as aftermarket items and, therefore, recommends not using these bearings for new bearing arrangement designs.

can also supply bearings with a tapered bore. For detailed information.

The product range also includes bearings with an inner diameter of taper holes. For more information, please contact us.

fig.1

fig. 2

The seals, which are fitted in a recess on the outer ring, make good, positive contact with the recess, without deforming the outer ring. The capping devices are available as:

Shields

are identified by the designation suffix Z

are primarily intended for applications where the inner ring rotates

are fitted in the outer ring and form a narrow gap with the inner ring

are made of sheet steel

are available as standard with an extension in the shield bore , expect some sizes without extension

protect from dirt and debris without friction losses

Application Area:

1. electric motors and in household appliances

2.car motors

3. office machinery

4. automation control

5. garden and household tools

Deep groove ball bearing catalogue size

Contact us:

Above enable us to be one of your trustable and excellent business partner;

If you are searching trustable and reliable Bearing manufactures, please feel free to contact us.